--- title: v8 description: "**1. Product Feature** 7 working modes: 9.6Hz,Schumann, Tesla 1,Tesla 2, Manual ,Recover & Alert. • 9.6Hz mode- Magnet frequency will be 9.6 Hz • Schumann mode- Magnet frequency will be 7.83 Hz • Tesla 1 mode- Magnet frequency will be…" url: "https://earthpulse.net/docs/v8/" updated: "2024-06-11" --- # v8 **1. Product Feature** 7 working modes: 9.6Hz,Schumann, Tesla 1,Tesla 2, Manual ,Recover & Alert. • 9.6Hz mode- Magnet frequency will be 9.6 Hz • Schumann mode- Magnet frequency will be 7.83 Hz • Tesla 1 mode- Magnet frequency will be 9.63 Hz • Tesla 2 mode- Magnet frequency will be 3.69 Hz • Manual mode- Magnet frequency will be adjusted between 1-14.4 Hz • Recover mode- Up to 12 hours 9.6 Hz with wake up phase and 1 extra hour Alert 14.4 Hz buffer whether set for 8 hour or 12hours. • Alert mode- Magnet frequency will be 14.4Hz • After timer completion of mode 15 mins 14.4Hz (alert) magnet will be ON. • Mode timer is adjustable. • After completion LCD displays DONE. • Power saving by automatically lcd backlight off after 1 minutes of inactivity. • Small LED blinks with magnet frequency when the module is working. **2. System Identification** ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/jpg.jpg?resize=487%2C379&ssl=1) **3. Procedures** Step 1: Power up the module with recommended power adaptor after connecting all the required magnets/coils. Step 2: Ensure the LCD display is ON after pressing power button. Step 3: Ensure LCD display displays “welcome”, “SleepOn Command”, “9.6Hz mode”. ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/1.jpg?resize=760%2C200&ssl=1) Step 4: Check if LCD backlight is getting off after 1 minutes (approx.) of no activity. Note down the time taken for lcd backlight off after inactivity. ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/image-016.jpg?resize=221%2C166&ssl=1) Step 5: After LCD light is off, check if LCD backlight is getting ON when up/down is pressed. Ensure that the LCD display message is same as the message before display OFF. ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/image-017.jpg?resize=221%2C170&ssl=1) Step 6: Press UP/Down button and ensure different modes are displayed on the screen. ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/2.jpg?resize=673%2C162&ssl=1) Step 7: Press Select button and check if the screen is going to timer selection section for the particular mode selected. ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/image-021.jpg?resize=220%2C167&ssl=1) Step 8: Check if LCD backlight is getting off after 1 minutes (approx.) of no activity. Note down the time taken for lcd backlight off after inactivity. ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/image-016.jpg?resize=224%2C168&ssl=1) Step 9: Check if the timer value is changing by pressing UP/Down Button ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/3.jpg?resize=775%2C182&ssl=1) Step 10: Check if display is displaying the below screen (for corresponding mode selected) after pressing Select button ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/4.jpg?resize=257%2C193&ssl=1) Step 11: Monitor LED blinking is ON, time is reducing with 1 minute duration and mode is correct. Also, check magnet working properly. ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/5.jpg?resize=718%2C205&ssl=1) Step 12: Check if LCD backlight is getting off after 1 minutes (approx.) of no activity. Note down the time taken for lcd backlight off after inactivity. ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/6.jpg?resize=237%2C182&ssl=1) Step 13: Check if LCD displays DONE after completing set timer and extra 15 minutes. Check if LCD backlight is ON during done message till select button is pressed. ![](https://i0.wp.com/earthpulse.net/wp-content/uploads/2023/02/7.jpg?resize=217%2C158&ssl=1) Step 14: After done message, if select button is pressed the screen and system should go to mode selection page. Step 15: Repeat above steps for each mode.